Best Miter Saw Blade: 2019’s Top Picks and Reviews

Best Miter Saw Blades: 2017's Top Picks and ReviewsAs any experienced woodworker knows, a new miter saw comes with a standard all-purpose combination blade that you will be able to use for a lot of rough woodworking projects.

However, for fine woodwork, it is important to consider an alternative (and this is where my reviews of the best miter saw blades come in handy) if you want to get that ultra-fine, splinter-free finish you are looking for when making cuts.

But with the amount of options on the market, it can be difficult to choose the right one. This guide will give you a better understanding of what these can do, as well as which one could be the best buy for you. 

In a hurry?
==>> Click for pricing and any available discounts on my top pick

Miter Saw Blades - Comparison Table

Table could not be displayed.

Miter Saw Blade Reviews

Freud D1080X Diablo 10-Inch 80-tooth ATBFreud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5 or 8-Inch Arbor and PermaShield CoatingFreud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5 or 8-Inch Arbor and PermaShield CoatingFreud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5 or 8-Inch Arbor and PermaShield Coating

Machine Use  – Table,  Miter & Slide Miter Saw
Application – Fine Finishing work
Diameter – 10 inches
Teeth – 80T Hi-ATB (High Alternate Top Bevel)
Best Use – Best 12 inch option for fine-finish cuts.

The Freud D1080X Diablo is a high-performance, thin kerf laser-cut blade that produces an ultra-fine cut on both hardwoods and softwoods. It makes flawless cuts with no splintering or edge chipping. When your pieces are cut you can expect to do little to no sanding, since  this Diablo produces clean and accurate cuts.

The D1080X has been designed to be durable and precise. Freud’s TiCo Hi-Density Carbide formula protects the teeth. This shock resistant formula helps to fight wear and tear, as well as maintains the sharpness for much longer than standard carbide teeth. For further protection, it is coated with a PermaShield coating. This non-stick coating aids in providing resistance to corrosion and heat.

Vibration and noise is largely reduced by the laser-cut stabilizer vents. Along with a quieter work environment, this feature also reduces warping and friction, aiding in extending the cutting life. The high alternate top bevel grind means that it has the lowest tear out characteristics of all grinds and is well suited for very clean cuts in material such as plywood, laminates, melamine and veneers. This makes the D1080X the best miter saw blade for hardwood cutting with ultra-fine finishes.

If you are looking for a circular saw blade that will produce accurate, splinter-free crosscuts on fine finish woodworking projects, then this is the perfect option for you. Just keep in mind that the red paint will start rubbing off on the wood during the first few cuts. To avoid getting this on your good materials, rather make a few test cuts on scrap pieces of wood first.

In a hurry?
==>> Click for pricing and any available discounts on theFreud D1080X Diablo 

Freud D1050X Diablo 10 Inch 50 ToothFreud D1050X Diablo 10-Inch 50-tooth ATB Combination Saw Blade with 5 or 8-Inch Arbor and PermaShield Coating

Machine Use – Miter & Table Saw
Application – Combination
Diameter – 10 inches
Teeth – 50T Alternate Top Bevel
Best Use – Best combination miter saw blade

The interesting design of the Diablo D1050X makes it a good multi-purpose option that can basically do anything. It is made of a tough steel plate with high-density carbide tips for strong, long lasting resistance. This product makes the process of creating clean and accurate cuts quick, easy and precise.

This thin kerf laser-cut blade provides easy feed, giving you extra control over the position. Ultimately this helps to maximize the precision of your cut and makes cutting much more efficient. Furthermore, the laser-cut stabilizer vents reduce noise and vibration.

The high tooth count of the D1050X provides fine crosscuts. After every 5 teeth, there is a separation by a deep gullet. This makes for effective chip removal for rip cuts. These gullets also provide enough space for effective ripping. The close grouped teeth, on the other hand, succeed in making smooth crosscuts.

The D1050X should, therefore, be your go-to tool when a single blade is needed for both ripping and crosscutting. The D1050X can be used to cut through both wood and wood composites. The versatility minimizes the need for blade changes between tasks, which can save a lot of time.

In a hurry?
==>> Click for pricing and any available discounts on the Freud D1050X Diablo

DEWALT DW3215PT 10-Inch 60 Tooth ATB CrosscuttingDEWALT DW3215PT 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5 or 8-Inch Arbor and Tough Coat FinishDEWALT DW3215PT 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5 or 8-Inch Arbor and Tough Coat Finish

Machine Use – Miter Saw
Application – Crosscutting
Diameter – 10 inches
Teeth – 60T Alternate Top Bevel
Best Use – Best 10 inch option at best price

The DEWALT DW3215PT cuts smoothly, cleanly and quickly with almost no chipping and vibration. This crosscutting saw blade is made of premium micro-grain carbide that will produce ultra-sharp edges and reduce splintering dramatically. The dampening slots help to reduce vibration in order to enhance accuracy and the tough coat finish will help to reduce heat and friction.

The thin kerf provides a clean, smooth finish while at the same time minimizes material waste.  The industrial anti-stick coating on the DEWALT DW3215PT helps in reducing friction, which in turn helps in extending the life. This also helps to reduce the pitch build-up.

This stops rust from forming and simplifies cleaning. Furthermore, this product has been precision balanced and the laser-cut body provides extremely accurate cutting.  It is substantially sharper and lasts longer than other options because of the bigger and longer teeth.

It is perfect for high-end trim work, as well as additional crosscutting and ripping applications in premium materials. This makes the DW3215PT the best for trim work and for crown molding. If you are looking for a quality finish option at a very affordable price, then this is the perfect choice for you.

In a hurry?
==>> Click for pricing and any available discounts on the DEWALT DW3215PT

DEWALT DWAFV31260 Flexvolt 60T, 12″DEWALT DWAFV31260 Flexvolt 60T Miter Saw Blade, 12

Machine Use – Miter & Table Saw
Application – Combination Wood Cutting
Diameter – 12 inches
Teeth – 60T ATB+R (Alternate Top Bevel Plus Raker)
Best Use – Smooth and efficient cutting

DEWALT has a lot of advantages when it comes to the manufacturing of blades with their leading techniques and technologies. Their new line maximize efficiency through the thin kerf designs and optimized grind angles.

The DEWALT DWAFV31260 Flexvolt features submicron grade carbide teeth that provide a longer overall life. Along with the hook angle and kerf, these teeth help to minimize the chip load when cutting. This thin kerf blade has been designed to help in maximizing runtime on your saw. The patented body slot design makes for smooth cuts at a maximum speed of 4 800 RPM.

The overall design of the 60 tooth DEWALT Flexvolt ultimately provides fine-finish and efficient cuts on most materials.  This is a great quality option with a good speed. The high-performance ceramic grain stays sharp for quick, efficient cutting and the high-density grain concentration makes for fast cutting and low heat build-up.

In a hurry?
==>> Click for pricing and any available discounts on the  DEWALT DWAFV31260 Flexvolt

DEWALT DWAFV31278 Flexvolt 78T, 12″DEWALT DWAFV31278 Flexvolt 78T Miter Saw Blade, 12DEWALT DWAFV31278 Flexvolt 78T Miter Saw Blade, 12

Machine Use – Miter & Table Saw
Application – Combination Wood Cutting
Diameter – 12 inches
Teeth – 78T ATB+R
Best Use – Smooth and efficient cutting

All of the DEWALT Flexvolt accessories have been designed to be highly efficient and designed in order to maximize runtime. The DEWALT DWAFV31278 78 tooth Flexvolt features a design very similar to the DEWALT DWAFV31260 Flexvolt 60 tooth miter saw blade. With the higher tooth count of the 78 tooth Flexvolt, however, you will be able to make more accurate and finer cuts.

As with the 40 tooth Flexvolt, the 78 tooth Flexvolt features professional quality thin kerf carbide blades that produce smooth cuts with minimal material waste.  The submicron grade carbide tips on the teeth will also last for a long time, and the body slot design makes for low vibration.

The DEWALT DWAFV31278 Flexvolt 78T is a value for money, multi-purpose blade that can be used for both softwood and hardwood, as well as materials such as plywood or chipboard.  The wedge shoulder design puts more steel behind every tip, ensuring increased accuracy and durability. Along with this, the computer balanced plate will reduce vibration for a better finish and improved accuracy.

In a hurry?
==>> Click for pricing and any available discounts on the DEWALT DWAFV31260 Flexvolt

Features to consider when looking for a miter saw blade

For a novice woodworker, the difference in blades may not seem like a big deal yet. However, it is important to choose the best miter saw blade for the application, since different types work best in different situations. The first thing you need to consider is the type of saw that you will be using. If you are going to use a miter saw (click here for my comparison of the top models) then you have to determine whether it’s stationary or sliding.

The miter saw blades mentioned can often be used on more than just one tool. This may not always the case, though, even if your saw is able to take the same size blade. To make sure you are using the correct one, you can have a look on either the surface of the saw blade or on the packaging. This will tell you which tools they can be used with.


When you know which saw you are going to be using, you have to figure out the specific size that you should use. The four regular sizes for miter saws are 7 ½ inches, 8 ½ inches, 10 inches and 12 inches. The wrong blade size can cause problems when you are cutting. Luckily, most miter saws have a built-in defense against the wrong size being used.

The circular slot in the center point of the blade is typically different sizes, depending on the size of the blade. This means that your 10-inch blade won’t fit correctly into a slot that was meant for a 12-inch blade.


Next up is the type you should be using. The three most common types are steel, high-speed steel and carbide-tipped. For fine-finish jobs, carbide-tipped will be your best option. They may be the most expensive, but they will produce smooth, accurate cuts and will last much longer.

For a more affordable option, you can consider going for steel. They are good when cutting most soft-woods since they can get dull quite quickly when they are used on hardwoods. The high-speed blades are tougher, however, and are good for a wide variety of cutting jobs. Since they are able to work at higher speeds, they won’t become dull as quickly as normal steel blades.


Your choice will also differ according to the types of cuts that you are going to be making. Here, the design is very important. The amount and type of teeth can make a big difference when cutting different types of materials. Generally more teeth makes for more accurate and fine cuts.

On the other hand, if you are working with thicker material, fewer teeth will work much better. The thickness is important as well. Standard blades are about ⅛ inches thick. For jobs where you are looking for a finer finish, a thin-kerf blade will be better as they are roughly about 3/32 inches thick.

If your saw doesn’t have a great deal of power, then you should think about getting yourself a thin-kerf blade for thicker cutting.  Lastly, the design of the teeth should be considered. For most woodworking projects, simpler teeth are effective enough and they will be much easier to maintain and sharpen.

Which Miter Saw Blade is the Best for You?

Miter saw blades can be bought in a huge selection of sizes and finishes, and every one of them is designed for functions. Whether you are cutting rough, big pieces of lumber or smooth finish cuts for exterior pieces, you will need the right choice for the job. Choosing the right blade for your miter saw, therefore, depends on what you will be using it for.

The option that works best for you will depend on a number of things. This includes the type of material you will be cutting, the type of cuts you will be making and the type of saw you will be using.

All of the reviewed miter saw blades are high-quality options that will last a very long time if they are used correctly. So whichever one of these you do decide to buy will make your cutting jobs much easier, much quicker and much more efficient.

Last update on 2022-10-07 / Affiliate links / Images from Amazon Product Advertising API